Specifications

Troubleshooting
Check & Error Display
70
d-05
A master roll has
not been set or it
has been incorrectly
set.
Set a master roll correctly and close the Master Making Unit
Cover.
)p.52
If a rewound master has been wrinkled or has worn off, cut the
edge of the master straight and then set the master again.
d-08
The Master Making
Unit Cover has not
been correctly
closed.
Close the Master Making Unit Cover correctly.
)p.52
d-17
An inappropriate
master roll has
been set.
Set a master roll specific to the machine.
The label at the
opposite side of
mark of the master
core has been
peeled off or
contaminated.
The label attached to the opposite side of mark of the
master core has the information needed for printing.
The machine does not start printing if it cannot read the label
information. Make sure that the master roll is specific to the
machine and that the label of master roll is not peeled off or
contaminated.
d-06
The Separation Fan
on the paper output
side is not set
correctly.
Set the Separation Fan correctly.
No indicator lights. F-05
An attempt is being
made to master
making a smaller
number of pages
than the minimum
print quantity.
Select a larger number of pages than the minimum print
quantity. Or change the initial setting of "Minimum Print
Quantity" in Custom Setting Mode.
)p.47
Location No. Error
No.
Cause Action
KZ30_UG.book Page 70 Monday, December 21, 2009 11:11 AM