Specifications

Troubleshooting
Check & Error Display
69
When the (CHECK SETTINGS) Indicator blinks
Check error locations and error numbers (on the Error Number Display) and take the following procedures.
If an error number is not shown, press the key.
Location No. Error
No.
Cause Action
d-01
d-12
The Print Drum
(Cylinder) has not
been correctly
inserted.
Set the Print Drum (Cylinder) correctly.
)p.62
d-03
The Ink Cartridge
has not been set or
it has not been
correctly set.
Set an Ink Cartridge correctly.
)p.50
d-04
An inappropriate Ink
Cartridge has been
set.
Set an Ink Cartridge specific to the machine.
)p.50
Important!:
• Use an Ink Cartridge specific to the machine. Using other Ink
Cartridges can result in malfunction or any other troubles.
The label on the Ink
Cartridge outlet
surface has come
off or surface is with
dirt.
The label on the Ink Cartridge outlet surface contains
information needed for printing.If the machine cannot read the
information, it does not operate.
Set an Ink Cartridge that is specific to the machine and that is
with label attachment and free from dirt.
F-01
A master has not
been wrapped
around the Print
Drum (Cylinder).
Press the key, then press the key. Or perform master-
making operation to wrap a master around the Print Drum
(Cylinder).
If you leave the machine without a master wrapped around the
Print Drum (Cylinder), malfunction may occur.
d-07
d-10
The Master
Disposal Box has
not been set or it
has not been
correctly set.
The Master
Disposal Unit has
not been correctly
closed.
Set the Master Disposal Box correctly.
)p.54
or
Close the Master Disposal Unit.
)p.66
KZ30_UG.book Page 69 Monday, December 21, 2009 11:11 AM