Specifications

Troubleshooting
Check & Error Display
66
A-04
Master ejection has
been failed.
1) Pull out the Print Drum (Cylinder) and remove the master
from the Print Drum (Cylinder) by hand. )p.65
2) Set the Print Drum (Cylinder) again.
3) Press the key.
J01
An original jam has
occured in the DF
Unit.
Remove the original jammed in the DF Unit.
• Grasp the Original Rease Lever and open the Scanner
Cover to remove the jammed original.
A-05
A master jam has
occured in the
master disposal
section.
Remove the Master Disposal Box and remove the jammed
master.
)p.54
If you cannot remove the jammed master although you have
removed the Master Disposal Box, pull out the Master Disposal
Unit and remove the master.
Important!:
• Once you pull out the Master Disposal Box, make sure to
empty it before placing it into position.
Location No.
Error
No.
Cause Action
KZ30_UG.book Page 66 Monday, December 21, 2009 11:11 AM