Specifications

Maintenance
Cleaning
61
Pressure Roller
If the Pressure Roller holding printing paper to the Print Drum (Cylinder) is dirty, dirty lines may appear on the back
of the printed material. If such a situation occurs, gently wipe the Pressure Roller with a soft cloth or tissue.
Important!:
• Make sure that the power of the machine is turned on when pulling out the Print Drum (Cylinder).
1
Press the key.
Make sure that the Print Drum (Cylinder) Pullout
indicator is tuned on.
Important!:
• If you forcibly pull out the Print Drum (Cylinder)
when its release indicator is tuned off, the Print
Drum (Cylinder) may be damaged.
2
Pull out the Print Drum (Cylinder).
Grasp the Print Drum (Cylinder) Handle and pull
out the Print Drum (Cylinder) until it stops.
3
Turn the machine off.
4
Open the Master Disposal Unit.
Grasp the Master Disposal Unit Release Lever,
and open the Master Disposal Unit to the left.
5
Wipe the roller.
Gently wipe the Pressure Roller with a soft cloth or
tissue.
KZ30_UG.book Page 61 Monday, December 21, 2009 11:11 AM