Specifications

Safety Guide - Cleaning
58
Maintenance
Safety Guide - Cleaning
This section describes the precautions to be observed when cleaning the machine. Read this section before cleaning
the machine.
AWARNING:
• Before cleaning any part of the machine, turn off the power.
• Do not remove any fixed covers.
• Contact your service representative immediately if you suspect any dangerous situation or have questions or prob-
lems with the machine.
• Contact your service representative before moving the machine.
• Do not allow unauthorized persons to make adjustments or repairs.
BCaution:
• The machine has precision moving parts inside. Do not handle the machine in any other way than described in this guide.
• Be careful of the edge of metal parts, otherwise it may cause an injury.
• Do not make any modifications to the machine or remove any parts.
• Neither RISO nor its dealer is responsible for maintenance service performed by non-RISO-authorized personnel.
Cleaning
Thermal Print Head
Clean the Thermal Print Head each time you replace the Master Roll.
Grasp the Master Making Unit Cover Lever, and open the Master Making Unit Cover.
KZ30_UG.book Page 58 Monday, December 21, 2009 11:11 AM