Specifications

Advanced Features
Automatic Sorting into Groups [Program]
42
Retrieving a Program
Stored programs can be retrieved for printing.
1
Press the key to turn on its indica-
tor.
Note:
• To cancel the program mode, press the key
once again.
2
Press the key.
3
Enter program number using the
Print Quantity keys.
The registered program is retrieved.
Note:
• You cannot enter an unregistered program
number.
4
Place an original.
Adjust the Original Guide to the width of original,
and place the original face down.
5
Press the Master-Making / Print
Change over key.
The machine switches into the master-making
mode.
6
Make necessary settings.
Make various settings as necessary.
You can set the following functions:
• Image Processing Mode
• Pencil
• Scanning Level Adjustment
• Enlargement/Reduction
• Auto-Process
•2-UP Printing
7
Press the key.
A proof copy is printed.
Check the print result, and if necessary adjust the
print position and other items.
8
Press the key again.
Printing is started with the last programed group.
Note:
• Printing is stopped each time a routine for one
set is finished. Remove printed pages from the
Paper Receiving Tray or put separation paper.
• To interrupt printing, press the key. Press
the key to resume printing.
• When printing is finished for all groups, the pro-
gram content is cleared. However, it is not
cleared if “Auto-Process” has been set to ON.
KZ30_UG.book Page 42 Monday, December 21, 2009 11:11 AM