Specifications

Basic Operations

Preparing to Print

Note:

• When using custom-sized paper, load the

paper so that its center comes to the center of

the Paper Feed Tray, and fit the Feed Tray

Paper Guides to the sides of paper.

Flip the lever up to lock paper.

Select the paper feed pressure.

Position the Paper Feed Pressure Lever accord-

ing to the finish of the paper.

Adding or Replacing Paper

When you add paper or replace with paper of a different

size at the time of printing, press the Feed Tray Lock

Lever to lower the Paper Feed Tray.

Important!:

• Do not mix paper of different sizes.

• After replacing with paper of a different size, reposi-

tion the Receiving Tray Paper Guides, the Paper

Stopper and paper jump wing according to the size of

the replacement paper.

• When you replaced with the paper of a different qual-

ity, adjust the position of Paper Feed Pressure Lever.

Paper

Feed

Pressure

When using thin paper

1 Standard paper 1: When using coarse

paper

2 Standard paper 2: When using standard

paper

Thick paper: When using thick paper

KZ30_UG.book Page 21 Monday, December 21, 2009 11:11 AM