Specifications

Preparing to Print
20
Basic Operations
Preparing to Print
Setting the Original Tray
Open the Original Tray to the outer side.
Setting up the Paper Feed Tray and Loading Paper
1
Lower the Feed Tray Lock Lever to
lower the tray.
2
Load paper.
Slide and adjust the Feed Tray Paper Guides
according to the sides of paper as follows.
1) Adjust the “right” Feed Tray Paper Guide to
the scale of Paper Feed Tray, and lock the
guide using Feed Tray Paper Guide Lock
Lever. Before sliding the Feed Tray Paper
Guides, release their lock levers.
2) Place paper in the printing orientation.
Note:
• See “Paper Recommendations” ()p.10)
for appropriate print papers.
3) Fit the “left” Feed Tray Paper Guide to the
side of paper, and lock the guide using the
lock lever.
A: Unlock
B: Lock
Important!:
• Do not use paper of inappropriate sizes or mix
paper of different sizes.
• Be sure to fit the Feed Paper Tray Guides to the
sides of paper.
If not, the paper feeding may fail.
KZ30_UG.book Page 20 Monday, December 21, 2009 11:11 AM