Specifications

Before Starting to Use
Getting Acquainted
15
1) Print Drum (Cylinder) ()p.61)
2) Ink Cartridge Holder
3) Print Drum (Cylinder) Lever ()p.50)
Pull out the Print Drum (Cylinder) by holding this lever.
4) Ink Cartridge ()p.50)
5) Paper Receiving Tray ()p.22)
The printed copies are output to this tray.
6) Paper Stopper ()p.22)
Stops paper printed and ejected into the Paper Receiv-
ing Tray.
Fit up according to the length of paper to be printed.
7) Receiving Tray Paper Guides ()p.22)
Aligns printed paper neatly. Slide according to the width
of paper before printing.
8) Paper Jump Wing ()p.22)
Adjust according to the size of paper in order to align
printed paper.
9) Power Switch ()p.23)
Turns the machine power ON or OFF.
10) Separation Fan
Pull this out to remove paper jammed on the paper out-
put side.
11) Master Roll ()p.52)
12) Master Making Unit Lever ()p.52)
Unlock the lever to open the Master Making Unit.
13) Master Making Unit Cover ()p.52)
Open the cover to mount the Master into position.
14) Master Roll Lock Lever ()p.52)
Locks the Master Roll in position.
2 1
43
9
5
6
8
7
11
121314
10
KZ30_UG.book Page 15 Monday, December 21, 2009 11:11 AM