Specifications

Before Starting to Use
Getting Acquainted
14
Getting Acquainted
Function and Name of Each Part
1) Original Tray ()p.20)
Place an original face down.
2) DF Unit
Feeds the original from the Original Tray to the Scanner.
3) Master Disposal Unit (Receiving Originals)
The scanned original is ejected.
4) Master Disposal Box Handle ()p.54)
Push down the lever when pulling out the Master Dis-
posal Box when the box is filled with discarded masters.
5) Master Disposal Box ()p.54)
Holds discarded masters.
6) Master Disposal Unit Release Lever
Grasp the lever to open the Master Disposal Unit when
the master jams or others.
7) Feed Tray Paper Guide ()p.20)
Holds and guides paper. Slide to fit to the sides of paper.
8) Paper Feed Tray ()p.20)
Load print paper on this tray.
9) Feed Tray Paper Guide Lock Lever ()p.20)
Locks the Feed Tray Paper Guides.
10) Feed Tray Lock Lever ()p.20)
Use the lever to lower or lift the Paper Feed Tray.
11) Paper Feed Pressure Lever ()p.21)
Adjust the lever according to the paper weight.
12) Sub Control Panel ()p.17)
13) Main Control Panel ()p.16)
14) Original Release Lever
Use the lever to open the Scanner Unit if paper jams or
originals need to be repositioned.
15) White Sheet
16) Scanner Glass
17) Original Guide
Holds and guides original on the Original Tray. Slide to fit
to the sides of original.
1
1514 16
17
2
3
4
5
6
7
89
10
11
12
13
KZ30_UG.book Page 14 Monday, December 21, 2009 11:11 AM