Specifications
Before Starting to Use
Originals
12
Originals
Size and Weight Restrictions
Usable originals are as follows.
• The maximum printing area is 249 mm × 352 mm ( 8
3
/
16
" × 13
17
/
32
" ). If the original image size is larger than this
limit, you need to reduce the original when making a master.
Note:
• When printing the following kinds of originals, copy to paper of an available size.
– Patched or worn originals
– Wrinkled, curled, folded, or torn originals
– Transparent originals (such as tracing paper or OHP transparencies)
– Chemically treated originals (such as thermal or carbon paper)
– Originals with correction fluid or glue
– Extremely thin originals (less than 50 g/m
2
(14-lb bond))
• You cannot use the following originals on this machine.
– Multi-layered originals, or multiple originals stapled or clipped
– Extremely thick originals (greater than 107 g/m
2
(28-lb bond))
Maximum Printing Areas and Margins
The maximum printing areas are as follows.
The maximum printing area is read and the originals are printed regardless of the original size and the paper size in
the printer.
No matter which size of originals, be sure to make some margins around the original. Especially a 10 mm (
3
/
8
") mm
margin on the top side is required for originals. The printing area that is larger than print paper stains the Pressure
Roller and smudges the paper.
Unit Size Weight
mm 182 mm × 257 mm to 257 mm × 364 mm 50 g/m
2
to 107 g/m
2
inch 7
3
/
16
" × 10
1
/
8
" to 10
1
/
8
" × 14
5
/
16
" 14-lb bond to 28-lb bond
Unit Maximum Printing Area Usable Print Paper Size
mm 249 mm x 352 mm 182 mm x 257 mm to 297 mm x 420 mm
inch 8
3
/
16
" × 13
17
/
32
"7
3
/
16
" X 10
1
/
8
" to 11
11
/
16
" × 16
17
/
32
"
DF feeding direction
Top margin
10 mm (
3
/
8
") and more
2
mm (
1
/
16
")
4
mm (
3
/
20
")
4
mm (
3
/
20
")
KZ30_UG.book Page 12 Monday, December 21, 2009 11:11 AM