Specifications

Before Starting to Use
Paper Recommendations
11
Tips for Better Paper Feeding
To prevent paper jams and misfeeds, follow the directions below:
• Set the Paper Feed Pressure Adjustment Lever to the position according to the thickness of the printing paper.
()p.20)
Standard paper: Standard position 1 ( 1), Standard position 2 ( 2)
Thin paper: Thin paper ( )
Thick paper (such as card stock): Thick paper ( )
• Adjust the position of the Paper Jump Wing according to the size of the printing paper. ()p.22)
• Always set the Feed Tray Paper Guide and the Receiving Tray Paper Guide according to the print paper
size.()p.20)
• Use flat printing paper that is free of folds. If the use of curled paper is unavoidable, place the printing paper so that
the curl faces down.
• Paper may stick to the Print Drum (Cylinder) surface if the top margin is too narrow on the original or if the upper
portion of the original uses a large amount of ink. To solve this problem, lower the print position to provide a wider
top margin or reverse the top and bottom of the original. Restart master making and printing from the beginning
when you rotate the original.
Storing Environment
Store printing paper in a level, dry area. Storing the paper in an excessively humid area can result in paper jams or
poor print quality.
After unpacking the printing paper, keep the remaining paper wrapped and store it in a moisture-proof box. It is highly
recommended to put silica gel in the paper storage box.
KZ30_UG.book Page 11 Monday, December 21, 2009 11:11 AM