User`s manual

2-45

10 Press the keys to move the cur-
sor, and press the keys to
enter the values.
11 After checking the message, press
the OK Key.
Message "Registered. Restart Printer" is displayed.
12 Press the Sleep Key to turn off the
power and then on again.
After message "Shutting Down" disappears and the
Power Key becomes orange, press the Sleep Key
again to turn ON the power.
5.8 Initial Setting
Basic setting such as details of sleep, buzzer sound, language, metric/inch switch, and print head nozzle initialization is made
here.
AAA indicates factory default setting.
~
~~
~ Settings
5.8.1
Sleep
Set whether or not to use the sleep mode for suppressing power consumption when the
printer is not used for a certain time.
ON: Sleep is enabled.
OFF: Sleep is disabled.
5.8.2
Waiting Time
Set the time that elapses until the printer enters the sleep mode if the sleep function is
enabled.
The time can be set to 1 - 99 minutes.
60
5.8.3
Beep Sound - Key
Set whether or not to sound the beeper when a key on the Operation Panel is pressed.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
5.8.4
Beep Sound - Status
Set whether or not to sound the beeper when, for example, printing is completed.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
5.8.5
Beep Sound - Error
Set whether or not to sound the beeper when an error such as paper jam occurs.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
5.8.7
Displayed Language
Set the language displayed on the Operation Panel.
Japanese/UK English/US English/French/German/Italian/Spanish/Portuguese
5.8.8
Metric/Inch Switch
Select the Metric or Inch unit for display on the Operation Panel.
mm: Displayed in mm.
inch: Displayed in inch.
5.8.17
Tray Selection Rule
Sets the condition for selecting a tray using the auto tray selection function.
Size: A tray in which paper of the size specified by the controller is set will be selected with
auto tray selection.
Size & Tray: A tray in which paper of the size and type specified by the controller is set will
be selected with auto tray selection.