User`s manual

2-42
5.6 Configuration Information Print
Configuration settings are printed in a list. Current printer settings and menu settings can be checked in a list.
~
~~
~ Settings
Restrictions in configuration information print
• Perform configuration information print when printing is not being performed, for exammple, when "Ready" is displayed.
• When configuration information print is executed, "Menu 6 Feed Tray Selection" is automatically set to "Standard Feed Tray." The
output paper size is A4. If paper is set in the Standard Feed Tray, the information is printed on the paper placed in the Standard Feed
Tray regardless of the paper size.
If "No Paper" is displayed and printing cannot be executed, set paper in the Standard Feed Tray.
5.6.1 System Information
1 Use steps 1 to 4 ()
))
)p.2-31) to display
"Administration."
2 Press the or key to display
"Config Info Print."
3 Press the OK Key.
4 Press the or key to display
"System Information."
5 Press the OK Key.
6 After checking the message, press
the OK Key.
When printing is complete, the screen in step 4 will
reappear, and you can continue setting.
7 Press the PRINT/PAUSE Key.
A list of system information is printed.
5.6.1
System Information
Information such as printer memory capacity, firmware version, and IP
address can be checked in a list.
5.6.2
Menu Setting
The menu settings made on the operation panel can be checked in a list.
5.6.4
Count Pattern
The result of "5.4.3 Count Pattern" and the count of the finisher function
(only if an optional finisher is connected) can be checked in a list.