User`s manual

2-41

5.5.5 Normal Cleaning
1 Use steps 1 to 4 ()
))
)p.2-31) to display
"Administration."
2 Press the or key to display
"Head Maintenance."
3 Press the OK Key.
4 Press the or key to display
"Normal Cleaning."
5 Press the OK Key.
6 After checking the message, press
the OK Key.
When message "Cleaning Print Head" blinks, clean-
ing is performed. After cleaning is complete, the
screen in step 4 will appear again.
To exit the setting, press the PRINTPAUSE key.
5.5.6 Cleaning Cycle
1 Use steps 1 to 4 ()
))
)p.2-31) to display
"Administration."
2 Press the or key to display
"Head Maintenance."
3 Press the OK Key.
4 Press the or key to display
"Cleaning Cycle."
5 Press the OK Key.
6 Press the or key to select the
desired cleaning cycle.
7 Press the OK Key.
The screen in step 4 will reappear.
To exit the setting, press the PRINTPAUSE key.