User`s manual

2-33

5.2 Paper Type Entry
If any paper other than printer recommended paper is used or paper is not fed properly, it could result in poor print quality. You
should register the paper type and feeding according to the paper type specifications. The registered setting is displayed in Paper
Type of "4.1.2 Standard Feed Tray," "4.2.2 Feed Tray 1," and "4.3.2 Feed Tray 2."
Also if printer recommended paper is used and paper is not fed properly because of operating environment or the like, the setting
can be changed.
When changing the setting or registering paper other than printer recommended paper, contact your local dealer (or service rep-
resentative) for consultation. Advice on proper setting will be given.
~
~~
~ Settings
If the following settings are made concerning the paper, the paper type is not displayed at "4.2.2 Feed Tray 1" and "4.3.2 Feed Tray
2." (These types of paper cannot be used in these trays.)
• Paper Type: Envelope, Card, Card-IJ
• Paper Feed Control: Envelope, Postcard
Paper Type 1 - 5 Register required information on
the paper type and paper feed for
paper of which a new size is regis-
tered in "5.1 Paper Size Entry" or
paper other than recommended
paper.
z
zz
z Registration
Sets whether or not the registered paper type is displayed as a
choice when setting a paper type in "4.1.2," "4.2.2" or "4.3.2."
ON: This item is displayed.
OFF: This item is not displayed.
z
zz
z Paper Type
Determine the image quality (colour matching) by selecting the
paper type. Select the same item as the paper to be used for
printing.
When printing, specify the same item in [Paper type] of the
[Main setting] tab of the printer driver screen.
• Standard Paper 1
• High-Quality 1
• High-Quality 2
• Envelope
•Card
•Card-IJ
z
zz
z Paper Feed Control
Select the paper thickness.
• Standard
•Card
• Thin/Light
• Envelope
• Custom:
Can be set in advance. For details, contact your local dealer
(or service representative) for inquiry.
Standard Paper 1
High-Quality 1
High-Quality 2
Envelope
Card
Card-IJ
If paper load in the Standard Feed
Tray or another feed tray is not fed
properly, change the Paper Feed
Control for the relevant paper.
If the paper type is Envelope,
Card or Card IJ, Paper Feed
Control cannot be changed.
z
zz
z Paper Feed Control
Select paper thickness.
• Standard
•Card
• Thin/Light
• Envelope
• Custom:
Can be set in advance. For details, contact your local dealer
(or service representative) for inquiry.