User`s manual

2-27

4.8.3 Stack Guide Adjust
1 Press the or key to display
"Stack Guide Adjust."
2 Press the OK Key.
3 To adjust the Side Guide positions,
press the or key , and to
adjust the End Guide position, press
the or key.
Only the arrow that corresponds to the pressed key is
displayed therefore the relevant value changes.
4 After setting is complete, press the
OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.
4.8.4 Shifting Guide
1 Press the or key to display
"Shifting Guide."
2 Press the OK Key.
3 Press the or key to select.
4 Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.