User`s manual
2-26
1 Press the MENU Key.
2 Press the or key to display
"Configuration."
3 Press the OK Key.
4 Press the or key to display
"Paper Ejection."
5 Press the OK Key.
The submenu of "Paper Ejection" is displayed.
4.8.1 Eject Wing
1 Ensure that "Eject Wing" is displayed.
2 Press the OK Key.
3 Press the or key to select.
4 Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.
4.8.2 Stack Guide
1 Press the or key to display
"Stack Guide."
2 Press the OK Key.
3 Press the or key to select the
method of adjusting the positions.
4 Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
If "Adjusted Position" is selected, adjust the amount
of movement in 4.8.3.
To exit the setting, press the PRINTPAUSE key.