User`s manual

2-19

4.1 Standard Feed Tray

 4.2 Feed Tray 1

 4.3 Feed Tray 2
Set the size and type of paper to be loaded in the Standard Paper Feed Tray and the other Paper Feed Trays and turn on or off the
Double Feed Check function.
Be sure to set when you have changed the type or size of paper.
~
~~
~ Settings
*1 Sizes that have been registered in "5.1 Paper Size Entry" are displayed.
*2 Types that have been registered in "5.2 Paper Type Entry" are displayed.
An example of method of setting the Standard Feed Tray is used for explanation in the procedure below. For Feed Tray 1 or Feed
Tray 2, display "Feed Tray 1" or "Feed Tray 2" in step 4.
1 Press the MENU Key.
2 Press the or key to display
"Configuration."
3 Press the OK Key.
4 Press the or key to display
"Standard Feed Tray."
5 Press the OK Key.
The submenu for the Standard Feed Tray (Feed tray)
is displayed.
4.1.1/4.2.1/4.3.1
Paper Size
Can be selected from Auto, A3, B4, A4, B5, A4-R, B5-R, Foolscap (Ledger, Legal, Letter, Letter-R,
Statement)
Registered Paper Size 000 × 000 mm (*1).
4.1.2 Paper Type Can be selected from Standard Paper 1, High-Quality 1, High-Quality 2
Registered Paper Type 1 - 5 (*2), Envelope, Card, Card-IJ.
4.2.2/4.3.2 Paper
Type
Can be selected from Standard Paper 1, High-Quality 1, High-Quality 2
Registered Paper Type 1 - 5 (*2).
4.1.3/4.2.3/4.3.3
Double Feed Check
Selects whether or not to detect "double feed" (feeding of multiple sheets of paper at a time).
When loading paper for which printing has been performed onto the back side, envelopes or paper with
a dark ground colour, turn off "Double Feed Check."
OFF: Double Feed Check is disabled.
ON: Double Feed Check is enabled.