User`s manual

2-17

Menu 3 Temp Data Retrieve
The data currently retained in the printer can be retrieved and printed again by specifying the number of copies (additional printing).

Retained data can be retrieved if a check mark is placed at [Keep the last page of the job in the printer.] in [Con-
troller setting 2] - [Initial setting] of [Administrator] of RISO Console. For details, refer to "HC-5500 Series User's
Manual for Console."
• The retained data is the last page of the latest printing. In the case of duplex printing, the data of the last sheet (two pages) is retained.
• When the printer enters the sleep mode, retained data will be cleared (not retained).
• The maximum number of copies that can be set for additional printing is "9999."
• If "4.9 Temp Data Clear" of the menu setting has been performed, message "No Temp Data" is displayed.
1 Press the MENU Key.
2 Press the or key to display
"Temp Data Retrieve."
3 Press the OK Key.
4 Press the keys to move the cursor,
and press the keys to input the
number of copies for printing.
5 Press the OK Key.
6 Press the PRINT

 PAUSE Key.
Printing of the set number of copies starts.