User`s manual

2-5

How to Use the Operation Panel
You can set or change the printer environment such as print position and paper type registration using the MENU Key of the Oper-
ation Panel.
Items That Can Be Set from the Menu
The item that can be set from the menu and the details of each setting are shown below.
AAA indicates the factory default setting.
Item Details of setting (range) Refer-
ence
Menu 1 Print Position Adjust
Adjusts the print position.
Horizontal and vertical
-20.0mm to +20.0mm (-
13
/
16
" to +
13
/
16
")
)p.2-14
Menu 2 Test Print
Prints one sheet for checking the details of setting.
 )p.2-16
Menu 3 Temp Data Retrieve
Retrieves temporary data and prints additionally.
0000
1 to 9999
)p.2-17
Menu 4 Configuration
Sets the paper to be set in the feed trays, the print den-
sity, and the Paper Receiving Tray.
)p.2-18
4.1 Standard Feed Tray
Sets the paper to be loaded in the Standard Feed
Tray.
)p.2-19
4.1.1 Paper Size Auto
A3/A4/B4/B5/A4-R/B5-R/Foolscap(Ledger/Legal/Let-
ter/Letter-R/Statement)/000 × 000 mm
4.1.2 Paper Type Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5/Envelope/Card/Card-IJ
4.1.3. Double Feed Check ON
OFF
4.2 Feed Tray 1
Sets the paper to be loaded in Feed Tray 1.
)p.2-19
4.2.1. Paper Size Auto
A3/A4/B4/B5/A4-R/B5-R/Foolscap(Ledger/Legal/Let-
ter/Letter-R/Statement)/000 × 000 mm
4.2.2 Paper Type Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5
4.2.3 Double Feed Check ON
OFF
4.3 Feed Tray 2
Sets the paper to be loaded in Feed Tray 2.
)p.2-19
4.3.1 Paper Size Auto
A3/A4/B4/B5/A4-R/B5-R/Foolscap(Ledger/Legal/Let-
ter/Letter-R/Statement)/000 × 000 mm
4.3.2 Paper Type Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5
4.3.3 Double Feed Check ON
OFF