Specifications

Replacing and Disposing Consumables

Removing and Installing the Print Drum (Cylinder)

5 Install the Print Drum (Cylinder).

Align the mark with the mark on the guide

and position the Print Drum (Cylinder) horizontal

relative to the guide.

Note:

• If you manually rotate the Print Drum (Cylinder),

make sure to rotate it so that the and

marks meet shown as below after the installa-

tion.

6 Return the units to the original posi-

tions.

Place the Print Drum (Cylinder) into position, and

then close the Front Cover.

REG-LL_EN.book Page 97 Wednesday, September 14, 2011 12:03 PM