Specifications

Advanced Features
Setting Up User Management
82
Setting the Upper Limit of the User’s Usage
Set the Total Count Limit or Master Count Limit. Limits up to 9,999 can be set.
Important!:
• The administrator must be registered in advance from “Create User”. ()p.78)
1 Press the key and enter the item
number.
The item numbers are as follows:
• Total Count Limit: 83
• Master Count Limit: 84
2 Press the [+] key.
The user number entry mode is activated.
3 Enter a user number using the Print
Quantity keys.
4 Press the [ ] key.
The “Total Count Limit” mode or “Master Count
Limit” mode is displayed.
Note:
• If you enter an unregistered user number, the
alarm sounds and the user number entry mode
is restored. Enter a correct user number.
5 Enter the limit number using the
Print Quantity keys.
Note:
• Setting “0” for the upper-limit count enables lim-
itless printing.
6 Press the [ ] key.
The setting of the upper-limit count is applied, and
the next registered user number is displayed.
Repeat steps 3 through 6 to continue to set the
upper-limit count for other users.
Important!:
• If you press the key before pressing the
[] key, the setting is canceled and the nor-
mal mode is restored.
• If you press the key before pressing the
[] key, the setting is applied and the normal
mode is restored.
• An alarm sounds and an Error No. (F-04) is dis-
played if the Total Count (Master Count)
reaches the upper limit during printing. TPress
the key to release the error. To restart print-
ing, contact the administrator and clear the TC
or MC. )p.83
Note:
• When the count has been set for the last regis-
tered user, the item number entry mode is
restored.
REG-LL_EN.book Page 82 Wednesday, September 14, 2011 12:03 PM