Specifications

Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
71
70 Base IP address setting (For EZ3XX
only)
Set an IP address for the machine.
)p.75
80 Create User
Up to 100 users (administrator
included) can be registered to use the
machine by performing the PIN code-
input.
)p.78
Administrator U-1 to U-99 (for user)
81 Management ON/OFF*
2
Enables or disables the User
Management function.
)p.80
OFF ON
82 Disable*
2
Turns machine access permission
ON/OFF.
)p.81
usable
unusable
83 Total Count Limit (per user)*
2
Sets the upper limit of TC for each
user.
)p.82
OFF
1 to 9999
84 Master Count Limit (per user)*
2
Sets the upper limit of MC for each
user.
)p.82
OFF
1 to 9999
85 Reset Total Counter (per user)*
2
Clears the TC for a specified user.
)p.83
86 Reset Master Counter (per user)*
2
Clears the MC for a specified user.
)p.83
87 Reset all User Counters*
2
Resets the TC and MC for all users in
a single procedure.
)p.84
88 ID Counter Report Monthly Reminder
setting*
2
When counting regularly, the
reminder date can be set for the
counted date.
)p.85
OFF
1 to 31
Note:
• To use the feature of ID Counter Report, the optional
RISO PC Interface Card USB2.0 is required.
89 ID Counter Report Monthly Reminder
(stop)*
2
Press the [] key to disable the output
of counting results for the current
month, and “idcc” is not displayed until
the next month of the reminder date.
)p.85
Item
No.
Changeable Items
Parameter Selection
0 1 2 3 4 5
REG-LL_EN.book Page 71 Wednesday, September 14, 2011 12:03 PM