Specifications

Setting up for Scanning Originals
Processing Photos with Dot Screening [Dot Process] (For EZ3XX only)
36
Processing Photos with Dot Screening
[Dot Process]
(For EZ3XX only)
This function processes photo originals with dot screening, resulting in clearer printing.
You can select the dot screening pattern from two types.
Press the key to select the type of a
dot screening.
Each time you press the key, the indicators light in the
order; (COARSE)→ (FINE)→ and then OFF.
The table shows the equivalent lpi (line per inch) to
each type:
Important!:
• You cannot use the Dot Process mode and Line
mode together.
• You cannot use the Dot Process mode and Pencil
mode together.
Type Equivalent Lpi
COARSE 53
FINE 106
REG-LL_EN.book Page 36 Wednesday, September 14, 2011 12:03 PM