Specifications

Basic Operations
Basic Operations
29
Basic Operations
Printing from a Paper Document or Book
1 Turn the power on.
The power switch is located on the lower right side
of the machine.
: Power On
: Power Off
Important!:
• When the machine is in the Energy Saving
mode, the key is lighted. Press the key to
wake up the machine.
Note:
• If data is received from a computer while the
machine is being operated, that data may be given
a higher priority for making a master. To give a
higher priority to an original placed on the
machine, press the key to turn off its indicator.
2 Check the display.
Check that any Check & Error Display section is
not lighted or blinking.
)p.102
Note:
• When the indicator is lighted, idling action is
activated just before the master-making operation.
)p.64
z When “ECO” is displayed:
When the power switch is set to ON or the
machine is activated from the Sleep status,
“ECO” is displayed in the Print Quantity Dis-
play.
If the PIN code-input is needed, “PASS” is con-
tinuously displayed.
z When “PASS” is displayed:
The PIN code-input is required when “PASS” is
flashing on the Print Quantity Display. For the
PIN code-input, see )p.31.
3 Place an original.
z When placing on the Glass Platen
Open the Platen Cover and place the original
face down. Align the center of the original with
the mark on the left-hand side of the glass.
After placing the original, slowly close the
Platen Cover.
Magazines, books, scrap books, etc. should be
placed on the Glass Platen. )p.19
Note:
• When placing an original is completed, the
process is automatically changed to the
master-making mode; the Master-Making
indicator on the Control Panel lights. If the
indicator is not lighted, press the key.
REG-LL_EN.book Page 29 Wednesday, September 14, 2011 12:03 PM