Specifications

Before Starting to Use

Connection with a Computer (Option)

With an optional interface board (RISO PC Interface Card USB2.0) installed, you can directly send data from a con-

nected computer to the machine as an original for printing. Because digital data itself is used for making a master, the

finish of prints becomes outstanding.

Connection Method

One-to-one connection with a Windows PC

•Cable:

USB cable

Less than 3m (10 feet) Hi-Speed USB

Important!:

• Before making the USB connections, turn

on both the machine and computer, and

wait until the initial screen is displayed.

• The maximum allowable voltage for

USB connector input and output is 5 V.

• For the USB connections, use a

commercially available USB cable (that

conforms to the USB 2.0 standard).

Note:

• The RISO PC Interface Card USB2.0

(option) is required.

z Network connections

•Cable:

Ethernet cable

Shielded cable that supports 10BASE-T

or 100BASE-TX

Important!:

• Before making the Ethernet connections,

turn off both the machine and computer.

Note:

• The RISO PC Interface Card USB2.0

and the RISO Network Card (both

options) are required.

• If the optional network interface card

“RISO Network Card” is installed, the

machine can be connected with a

Macintosh computer. For details, see

the User’s Guide of RISO Network Card.

USB port on the machine

USB port on

your computer

USB

port

REG-LL_EN.book Page 14 Wednesday, September 14, 2011 12:03 PM