Specifications

Troubleshooting
Troubleshooting Tips
120
The machine repeats the master-
making process for each original.
“Collate Copies” or “Collate” was
selected for printer driver settings for
the received document data.
Cancel the current print job and
resend the document data without
“Collate Copies” or “Collate”
selected for the printer driver
settings.
The key blinks. Received data is waiting for output. Press the key to output the data.
To delete data waiting for output,
press the key.
“ ”appears on the Print
Quantity Display and the machine
does not start.
When the machine is in use, the
power was turned off.
Press the key.
Problem Cause Action
REG-LL_EN.book Page 120 Wednesday, September 14, 2011 12:03 PM