Specifications

Troubleshooting
Troubleshooting Tips
117
Paper gets jammed in the ADF unit
(Option).
There is any paper caught in the
ADF unit (Option).
Pull the ADF Original Release Lever
to the right or turn the Release
Original Dial and remove the
jammed paper.
Printed copies are not neatly aligned
in the Paper Receiving Tray.
(The indicator blinks frequently.)
The positions of the Receiving Tray
Paper Guides and the Paper
Stopper are inappropriate.
Adjust the Receiving Tray Paper
Guides and the Paper Stopper to the
size of paper. For thick paper,
slightly widen them as necessary.
If you have adjusted the horizontal
position on the Paper Feed Tray,
shift the Receiving Tray Paper
Guides in the same direction.
)p.22
The Paper Feed Pressure
Adjustment Lever is positioned
incorrectly.
If the Paper Feed Pressure
Adjustment Lever is set to “CARD”
( ), printed copies may not be
correctly aligned when using
standard paper.
Set the Paper Feed Pressure
Adjustment Lever to “NORMAL” ( ).
)p.20
The positions of the Paper Jumping
Wings are inappropriate. (For
EZ3XX only)
Position the Paper Jumping Wings
according to the size and thickness
of paper.)p.22
The Paper Arrangers are not
properly set. (For EZ3XX only)
Set the Paper Arrangers properly.
)p.22
The corrugators are not properly set.
(For EZ2XX only)
Set the corrugators properly. )p.22
Problem Cause Action
ADF Original Release Lever
Original Release Dial
REG-LL_EN.book Page 117 Wednesday, September 14, 2011 12:03 PM