Specifications

ManualsBrandsRiso ManualsComputer equipmentComColor 9150R

Introduction

document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly

prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.

Page 5

August 2009

RISO ComColor 9050

www.BERTL.com

GENERAL SPECIFICATIONS

Color Support

Full color

Print Type

Line-type inkjet system

Ink Type

Oil-based pigment ink (Cyan, Magenta,

Yellow, Black)

Resolution

Standard: 300 dpi (main scanning

direction) x 300 dpi (sub-scanning

direction)

Fine: 300 dpi (main scanning direction) x

600 dpi (sub-scanning direction)

Number of Gray

Levels

For each CMYK color (8 gray levels)

Data Processing

Resolution

Standard: 300 dpi x 300 dpi

Fine: 300 dpi x 600 dpi

Line smoothing: 600 dpi x 600 dpi

Warm-up Time

2 min. 45 sec. or less (at room

temperature of 68 degrees F (20

degrees Celsius)

First Print Time

Monochrome: 8 sec or less¹ (when

copying A4-R/Letter-R orientation using

monochrome mode); Color: 8 sec or

lessº (when copying A4-R/Letter-R

orientation using color mode)

Continuous Print

Speed²

A4-R Simplex: 150 ppm; Duplex: 150

ppm (75 sheets); Letter-R Simplex: 146

ppm; Duplex: 146 ppm 73 sheets); A4

Simplex: 110 ppm; Duplex: 110 ppm (55

sheets); Letter Simplex: 116 ppm;

Duplex: 116 ppm (58 sheets); B4/Legal

Simplex: 90 ppm; Duplex: 90 ppm (45

sheets); A3 Simplex: 80 ppm; Duplex:

80 ppm (40 sheets); Ledger Simplex: 78

ppm; Duplex: 78 ppm (39 sheets)

Duplex Printing

Standard

Paper Size

Standard Tray Maximum: 13 3/8” x 21

5/8” (340 x 550 mm); Minimum 3 9/16” x

5 13/16” (90 x 148 mm)

Feed Tray Maximum: 11 11/16” x 17”

(297 x 420mm); Minimum 7 3/16” x 7

3/16” (182 x 182 mm)

Printable Area

Maximum 12 3/8” x 21 9/16” (314 x 548

mm)

Toner Yields

N/A

RISO ComColor® 9050 Main Unit

Guaranteed Print

Area³

Standard: Margin width of 1/8” (3 mm);

Maximum: Margin width of 1/16” (1

mm)

Paper Weight

Standard Tray: 12-lb bond to 56-lb

bond (46 to 210 GSM), plain paper

Paper Feed

Method/Paper Tray

Capacity4

Standard: 500 sheets (Height up to 2

3/8” [60 mm]);

Option: 1,000 sheets (when using the

optional Auto-Control Stacking Tray or

Wide Stacking Tray)

Continuous Printing

Capacity

9,999 sheets

Output Tray Capacity4

Standard: 500 sheets (Height up to 2

3/8” [60 mm])

Option: 1,000 sheets (when using the

optional Auto-Control Stacking Tray or

Wide Stacking Tray)

Power Source

AC 100-240 V, 10-5 A, 50-60Hz

Power Consumption

Max: 1,000 W

Ready5: 250 W

Sleep: Max 45 W

Hibernate6: Max, 1W

Operating Noise

Max, 60 dB (when printing)

Operating

Environment

Temperature: 59ºF to 86ºF (15ºC to

30ºC); Humidity: 40% to 70% RH (non-

condensing)

Dimensions

(W x D x H)

In use: 46 1/6” x 27 3/8” x 40 3/16”

(1,170 x 695 x1,020 mm)

Weight

386 lb (175 kg)

Required Space

With front cover and feed tray

extended: 47 5/8” x 48 7/16” x 40 3/16”

(1,210 x 1,230 x 1,020 mm)

With face down tray and standard tray

stored: 45 ¼” x 27 3/8” x 39” (1,150 x

695 x 990 mm)

¹ Within 10 minutes after the last print job

² When using plain paper and recycled paper (85 GSM [23-lb bond]) and

density setting 3 (Standard). Chart used: Print measurement pattern

(Color measurement sample 2 [JEITA] standard patter [J6])

³ The margin when printing envelopes is 10 mm (3/8”). For ComColor

7050/7050R, the guaranteed area when printing images is the area

endorsed within 3mm (1/8”) of the edges of the paper

4 When using plain paper and recycled paper (85 GSM [23-lb bond])

5 When not printing

6 Denoted as “Stand-by” in user manual