Specifications

Media Handling
Copyright © 2009 BERTL Inc. September 25, 2009
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 36
August 2009
RISO ComColor 9050
www.BERTL.com
MEDIA INPUT
Substrate (media, including paper) handling is a core
requirement of every device. If a device cannot print a file
on specific paper desired by the user, it hardly matters
how fast the print engine is, or how many pages it can
produce.
A device’s paper-handling capability basically concerns
how it can handle two key criteria: the paper size and
paper weight it can feed, as well as the maximum number
of pages that can be loaded in the device’s drawers, trays,
etc. The greater the paper capacity, the less time users
will spend reloading paper.
The RISO COMCOLOR® 9050 equipped with the optional
multifunctional finisher.
Paper Guide
Control
Auto Control
Stacking Tray
Wide Stacking
Tray
Auto Manual
Output Capacity
1,000 sheets
Output
Paper size
Min. 3
15
/
16”
x 5
13
/
16
"
(100 x 148mm)
3
9
/
16
” x 5
13
/
16
"
(90 x 148mm )
Max
.
12
9
/
16
” x 17" *
1
320 x 432mm
13
3
/
8
” x 21
5
/
8
"
340 x 550mm
Output Paper
weight
12-lb bond ~ 56-lb bond (46 – 210 g/m
2)
up to 107-lb bond (400 g/m
2)
when using
the “Card Feed Kit”
Output Speed
Engine speed
Envelopes
OK OK
MEDIA OUTPUT AND FINISHING
Media-Output Features Summary
FS-607 Booklet Finisher
Staple Location Corner/ Side Staples/Booklet
Staple Type Fixed length
Staple Punches 2 holes, 3 holes, 4 holes
Staple Capacity 60 sheets / 20 sheet booklet
Stacking Capacity 2000 sheets
Fold Types Fold & Staple
Minimum/Maximum
Media Weight
60 gsm (16-lb bond) to
90 gsm (24-lb bond)
(cover: 210 gsm (56-lb bond))
Dimensions (h x w x d) 43 5/16" × 29 15/16" × 45 7/8";
(1,100 mm × 760 mm × 1,165 mm)
Weight 289 lb. 131 kg
Power Requirements 80 W or less
(supplied by engine)
Power Source AC 100-120/200-240 V, 50/60 Hz,
2.0/1.0 A or more
Power Consumption Max. 175 W
Operating Noise (when
using finisher)
Max. 68 dB
WHAT WE LIKED
• Prints on media up to 13
3
/
8
” x 21
5
/
8
" (340 x 550mm),
allowing users to print full-bleed 12” x 18” images and
preserve crop marks and borders.
• Generous paper capacity that supports up to 9,999
sheets.
• Broad range of document-finishing options available,
including stapling, saddle-stitch booklet maker, and
document hole-puncher to suit virtually any printing
application.
• Sturdy paper drawers are built for the long haul, are
easy to adjust, and can handle the maximum media
size and weight.
WHAT WE WOULD LIKE TO SEE
• BERTL was very satisfied with the RISO ComColor®
9050’s media input and output media handling
capabilities.