Specifications

Ease of Use
Copyright © 2009 BERTL Inc. September 25, 2009
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 35
August 2009
RISO ComColor 9050
www.BERTL.com
The duplex and paper transport units pull out like a drawer
for easy access to misfeeds.
BERTL analyst found it very easy to access and clear any
potential paper jams from the device with the simple
instructions communicated to the user directly from the
control panel.
Users have access to the misfeed areas on the
Multifunctional Finisher by simply opening the front doors
of the finisher and following the instructions on the control
panel to locate the specific section where a jam has
occurred.
WHAT WE LIKED
• Ink cartridges can be replaced very easily.
• Misfeed access on the main unit and multifunctional
finisher were very easy to correct. Users will not have any
problems resolving any misfeed issues with the step-by-
step instructions offered on the control panel.
• All routine maintenance is performed at the front of
the device.
WHAT WE WOULD LIKE TO SEE
• BERTL found performing routine maintenance on the
RISO ComColor® 9050 to be very easy to
accomplish.