Specifications

Ease of Use
Copyright © 2009 BERTL Inc. September 25, 2009
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 34
August 2009
RISO ComColor 9050
www.BERTL.com
Routine maintenance is easily performed from the front of the
device by opening the front cover doors.
ADDING INK
Ink can be added to the RISO ComColor® 9050 by
opening the front cover door of the device. The user slides
out the empty ink cartridge; slides in a new ink cartridge;
then closes the cover door to continue printing.
REMOVING MISFEEDS
If a paper jam occurs in the machine, finisher, or ADF,
printing will stop, the error light on the operation panel
flashes red, and the paper jam screen appears on the
touch panel.
Above and below: Intuitively the device it will indicate to
the user how to remove the jam directly from the control
panel.
.
The ComColor 9050’s paper-transport misfeed-access area is
very easy to access.