Specifications

Copy
Copyright © 2009 BERTL Inc. September 25, 2009
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 15
August 2009
RISO ComColor 9050
www.BERTL.com
Document-Finishing Penalty
# of
originals
Finishing
Selection
Time
In
Secs
1 Set
Time
(Secs)
Penalty
Per Set
(Secs)
10/5
Corner Staple
23.00 11.40 -0.52
10/5
Side Staples
25.00 11.80 -0.22
8/5
Saddle-Stitch
Booklet
40.00 14.80 0.08
10/5
Covers and Inserts
48.00 16.40 0.48
WHAT WE LIKED
• Tested black-and-white FPOT as fast as 8.50 seconds
in simplex copier mode, and as fast as 10 seconds in
duplex copier mode.
• Tested color FPOT as fast as 8.00 seconds in simplex
copier mode, and as fast as 10.00 seconds in duplex
copier mode.
• Tested black-and-white copier productivity was up to
97.7 ppm in simplex mode and up to 47.9 ppm in
duplex mode.
• Tested color productivity in simplex mode was as fast
as 97.7 ppm, and as fast as 47.9 ppm in duplex color
mode.
• Minimal document-finishing penalty when applying
Corner Staple, Side Staples, Saddle-Stitch Booklet,
and Covers and Inserts
• Fast document-feeder speeds of up to 40 opm in both
color and monochrome using simplex mode and up to
15 opm in duplex mode, matching RISO’s rated speed
of 40 opm.
• Auto Document Feeder with 100 sheet capacity.
• Automatic single/double-sided scanning capabilities.
• RISO rated copy time of up to 11.5 seconds.
• Interrupt Copy allows users to interrupt a job currently
being printed to copy a more urgent job.
• Copy and Pause function is useful for high-volume
copying. One sheet is copied and then copying stops,
enabling the user to check the result of the settings.
• The ADF Scan and Pause function allows users to
copy a large quantity of originals that cannot be loaded
at one time in the ADF to be copied as one job. Up to
1,000 one-sided originals or 500 two-sided originals
can be copied as one job.
• The Book Shadow Erase function will erase shadows
that appear in the center of copies when copying an
open book.
• This device has the ability to auto recognize color
which is a new function not previously supported on
the HC model. Monochrome pages will now be printed
in K and not in CMYK. Customers who are in a cost
per copy environment will save money as the click will
now be charged as a monochrome click and not a
color click.
• Users can specify the color mode from auto-color,
black, cyan and magenta. The entire image will appear
in cyan or magenta.
WHAT WE WOULD LIKE TO SEE
• BERTL was exceptionally satisfied with the RISO
ComColor 9050’s copying capabilities.