Specifications

Copy
Copyright © 2009 BERTL Inc. September 25, 2009
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 12
August 2009
RISO ComColor 9050
www.BERTL.com
Users can configure the staple and punch settings with
optional multifunctional finisher directly from the control
panel.
Within the Color Mode setting users can select the [Auto]
setting which is designed for documents with a mixture of
color and black-and-white pages, the auto color mode
senses the presence or absence of color and controls ink
usage to reduce ink consumption and save cost. The
Mono-Color Print setting allows users to print their
documents in a single color. Users can specify from black,
cyan and magenta.
The touch screen displaying feed tray options. Here users
can make a tray a default, change the paper settings, and
set a tray to manual or auto.
The Original button found on the [Basic] copy screen
allows users to indicate the type of original being copied to
so as to generate the best possible copy output. Options
include for Line/Photo, Line, Photo, and Map/Pencil Mode
with Dot Process set to off, 70 lpi, and 100 lpi.
With the multi-up option users can impose several pages of
an original onto one sheet.
Users can add preprinted sheets or colored paper that has
been loaded in the tray, to the front and back of the
printouts as covers.