Specifications

Copy
Copyright © 2009 BERTL Inc. September 25, 2009
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 11
August 2009
RISO ComColor 9050
www.BERTL.com
Users can control all of the copy settings from this screen.
Options include Color Mode, Reproduction Size, Feed
Tray, Originals, Scanning Level, and Duplex/Simplex.
Above and below: Users can register up to 4 frequently
used functions to the direct access area of the [Basic]
screen or up to 16 functions to the [Selections] screen.
The functions tab section describes the copy functions that
are configured within the [Functions] screen.
Above and below: Users can set various finishing settings
by selecting an output image from the Select Layout
screens.