User`s guide

2-2
Perfect binder User’s Guide 05
Replacing the Consumables
For comfortable use of the Perfect binder, the daily maintenance is important. This section describes the
replacement of glue sheet, deodorant filter, and dispose of cutting trash.
This machine warms up the glue, so that the glue unit part becomes high temperature. Body contact may
cause burn.
The side cover does not open until the temperature inside of this machine becomes low. Please wait until
this machine cools down.
● When the remaining amount of the glue is low, a message is displayed on the printer's operation panel.
Check your stock.
● For the maintenance of the printer, see the printer manual.
Replacing the Glue Sheet
When the glue runs out, the message prompting to
replace the glue sheet is displayed on the printer's
operation panel and the binding is stopped.
Replace the glue sheet.
1 Open the side cover.
2 Remove the finished glue sheet
core.
3 Remove the finished rolling core.
4 Set the new rolling core.
Align the projection of the Perfect binder and the
notch of the core, and fit them.