User`s guide

1-8
1 Functions for Binding
Perfect binder User’s Guide 05
■ Setting on the RISO Console
1 Click [Admin.] in the monitoring
screen.
2 Click [Perfect binder settings].
3 Set the condition when power is
turned on.
4 Set the transit time to each mode.
5 Click [OK].
Cover Settings for the Perfect
binder
You can cut off the surplus area of the cover. To cut
off the cover, set the cover cutting position and
gluing position.
The values set in [Perfect binder; Cover] are
saved until the settings are changed. Confirm
the cutting position and gluing position with
the test print and adjust them.
[Setting items]
• Cover cutting
Set whether to cut off automatically the long
side of the cover sheet or not.
Value: ON, OFF (Default: ON)
• Cover cutting position
Set the cutting position of the long side of
the cover sheet.
"Value: -30.0 to +30.0 mm (1 3/16")
(Default: 0.0 mm)"
• Cover gluing position
Set the gluing position of the long side of
the cover sheet.
Value: -30.0 to +30.0 mm (1 3/16")
(Default: 0.0 mm)