User`s guide

1-7
1
Perfect binder User’s Guide 05
Administrator Settings
In the "Admin. Settings", you can change the environment settings related to the Perfect binder and the
default value. This section describes the settings related to the Perfect binder and cover sheets.
● For details on the Admin mode and methods of the "Admin. Settings", see the printer manual.
● You can make the "Admin. Settings" related to the Perfect binder on both the operation panel and the RISO
Console.
Perfect binder Settings
Set to recover the Perfect binder in [Sleep] mode or
[Warming up] mode when the sub power of the
printer is ON or the printer is recovered from the
power saving mode.
You can also set the transit time to the cooling
down mode which decreases the heater
temperature, or sleep mode which saves the power
consumption.
Even during the cooling down mode and the
sleep mode, information can be retrieved from
the printer. When the Perfect binder receives a
job from the printer, the Perfect binder goes to
the warming up mode.
[Setting items]
• Specify the condition of the Perfect binder
when power is turned on.
Value: Sleep, Warming up
(Default: Sleep)
• Perfect binder Cool-down transition time
Value: 1 - 60 mim. (Default: 10 min.)
• Perfect binder Sleep transition time
Value: 1 - 60 mim. (Default: 10 min.)
● To save the power consumption of the Perfect
binder, set to [Sleep]. However, it takes a long
time to move to the binding mode.
● When the condition when power is turned on is
set to [Warming up], you can send the binding
job without waiting.
● Depending on the transit time to the cooling
down or sleep mode, the power consumption
can be saved by moving to the sleep mode,
instead of the cooling down mode from the
binding mode. However, moving to the cooling
down or sleep mode is disabled.
■ Setting on the Operation Panel
1 Press [Perfect binder settings] on
the [Admin. Settings] screen.
2 Set the condition when power is
turned on.
3 Set the transit time to each mode.
4 Press [OK].