User`s guide

1-4
1 Functions for Binding
Perfect binder User’s Guide 05
● To check the current settings, press
[Settings].
● For the folder job, press [Preview] to check
the printing image.
4 Select [Print], [Save], etc.
The selected item is performed.
Setting the Binding Functions
On the [Functions] screen, you can check the glue
unit temperature in the Perfect binder and configure
the manual binding settings.
Glue Temperature
You can check the glue unit status (glue and glue
tank) before sending the binding job.
The binding job does not start when the glue unit
does not reach the suitable temperature. When the
glue temperature is low, press [Prewarm].
● It may take a long time to warm up the glue unit
to the suitable temperature. It is recommended
to confirm the glue unit temperature before
sending the job.
● On the [Glue temperature] screen, the glue unit
temperature is indicated with the bar (five
levels) and message.
● All jobs sent to the printer are not printed until
the warming-up binding job is finished.
■ Setting on the Operation Panel
1 Press [Functions] on the printer
mode screen.
2 Press [Glue temperature].
The [Glue temperature] screen is desplayed.