User`s guide

Perfect binder User’s Guide 05

Creating a Booklet from Original Data

You can send the original data from your PC, print and bind up booklets with the Perfect binder.

There are two methods of creating booklets from original data.

• Using original data for both cover and body pages

• Using original data for body pages only (cover is already printed)

For operations of the binding data creating software (Perfect Binding Software) and compatible file for-

mats, see the "Application Guide".

Prepare the original.

Prepare the cover and body page data created by

MS Office product (e.g., MS-Word) or in PDF

format.

Start the perfect binding software.

Load original data and create

binding data.

For details on the perfect binding software, see

the Application Guide.

Confirm the machine status.

Check the operating condition of the Perfect

binder and glue temperature. (p. 23 "Confirm-

ing the Main Unit's Status")

Load the paper.

Load in the cover sheet inserter if using the

printed cover.

Change the printer's [Feed tray] settings

according to the paper size loaded to the feed

tray.

If the paper size is different between the [Feed

tray] setting and loaded paper, you cannot get

the correct printing result.

● See the printer manual for details on

loading the paper.

● For the loading method of the printed cover,

see "Loading the Body Pages/Cover

(Manual Binding)" (p. 25).

● You can load the printed cover sheet on the

feed tray. However, when using irregular

size paper, the paper size must be

registered in advance by using the "Admin.

Settings".

Send the binding job from the

perfect binding software.