User`s guide

23
Perfect binder User’s Guide 05
Binding Preparations
Before binding up, make the Perfect binder ready for use.
Turning the Power ON/OFF
The Perfect binder's [Main power] switch is at the
bottom of the right side. When it is turned ON, the
power of the Perfect binder is turned ON and OFF
by connecting to the power of the printer's main
unit.
Turning the Power ON
1 Make sure that the sub power of
the printer is OFF.
If the sub power is OFF, the [Sub power] key is
turned off.
Keep the main power of the printer ON.
2 Turn ON the Perfect binder's [Main
power] switch.
3 Press the printer's [Sub power]
key.
When the power is turned ON, the Perfect
binder starts in the sleep mode or the warming
up mode. You can change the start-up mode in
the "Admin. Settings". (p. 1-7 "Perfect binder
Settings")
Turning the Power OFF
1 Make sure that the sub power of
the printer is OFF.
Keep the main power of the printer ON.
2 Turn OFF the Perfect binder's
[Main power] switch.
The main power of the Perfect binder is OFF,
the functions of the Perfect binder cannot be
used on the printer. Also, the functions and
illustration of the Perfect binder are not dis-
played on the operation panel and RISO Con-
sole.
Confirming the Main Unit's
Status
Confirm the Perfect binder's and the printer's
status. To perform the perfect binding, the power of
the Perfect binder is required to be ON and the glue
temperature is required to be suitable.
The printer's and the Perfect binder's statuses
can be confirmed on the operation panel and
RISO Console. For the confirmation method
on the RISO Console, see the printer manual.