User`s guide

Perfect binder User’s Guide 05

Perfect Binding

This section describes the method, terms, and constructure of this machine.

Binding Method

Perfect binding does not use staples; the binder glues body pages to the cover sheet. The cover sheet which

contains the front covers, spine and back covers in one sheet wraps the body pages.

With the Perfect binder, you can make a booklet by directly printing out original data or loading the printed

cover and body pages.

Terms

This section describes the terms of binding used in this guide.

■ Terms of the Status of the Perfect binder

The Perfect binder's status changes to the following, according to the printer's status.

You can make settings in "Perfect binder Settings" (p. 1-7).

Term Description

Printer The printer which can be connected to the Perfect binder (ComColor 9150/

9110/7150/7110)

Glue heater Heater which warms up the glue temperature to 180 °C (356 °F) and glue tank

temperature to 155 °C (311 °F)

Warming up mode Status that the glue heater warms up the glue and glue tank to the suitable

temperature

Stand-by mode Status that the glue and glue tank is the suitable temperature so that the

machine is ready for binding

Cooling down mode Status that the glue heater runs at the lower temperature to prevent the

deterioration of the glue

Sleep mode Status that the glue heater stops warming and the power consumption of the

Perfect binder is saved

Printer Perfect binder

• Sub power ON

• Wake-up key ON

Starts in the "warming up mode" or "sleep mode",

according to the "Admin. Settings"*

• Power saving mode

Backlight OFF

Power consumption (in sleep) (Standard)

Sleep mode

• Sub power OFF

• Power saving mode

Power consumption (in sleep) (Low)

Power OFF