User`s guide

9
Perfect binder User’s Guide 05
Before Use
This section describes the precautions that must be observed before using the machine.
Installation Location
Observe the following precautions.
■ Your dealer will help you to determine a proper location for the machine at the time of delivery.
■ When moving the machine, contact your service representative.
■ Avoid installing the machine in the following locations. Otherwise, incorrect operation, malfunction, or
accident might occur.
• Places subject to direct sunlight or excessively illuminated such as next to windows (if inevitable, use a curtain at
the window)
• Places subject to sudden temperature variations
• Places excessively hot and humid or cold and dry
• Places close to fire or heat
• Places directly subject to cold air from air conditioners or hot air from heaters, as well as radiant heat
• Places with poor air permeability or ventilation
• Dusty places
• Places subject to excessive vibration
■ Install the machine in a place whose levelness is within the following specified range.
Installation surface level: 2° or less
■ Operate the machine under the following environment conditions.
Temperature range: 15 °C to 30 °C (59 °F to 86 °F)
Humidity range: 40% to 70% RH (non-condensing)
Power Connection
Observe the following precautions.
■ Connect the plug securely to the optional connection outlet on the printer main unit to avoid a loose
connection.
■ Install the machine near an electrical outlet.
■ When the [Main power] of the machine is turned ON, the machine is turned ON and OFF by the power of
the printer.