Troubleshooting guide

ComColor Series Troubleshooting Guide 01
What is the correct orientation of the original for [Top side up] and [Top side left] in the [Original orientation] setting?
When facing the machine…
I was logged out without doing anything.
The administrator configured [Auto-log out time] for [Login setting]. [Auto-log out time] can be set to between 1
and 60 minutes.
Contact your administrator.
Whenever I try to use the machine, it is always in sleep status and pauses my job.
When the administrator sets [Sleep] to [ON] with the [Power save setting] item, the machine automatically
enters sleep status after a fixed period (1 to 60 minutes). [Sleep] setting can be turned off.
Contact your administrator.
What is the [Offset output] setting?
This function enables the machine to output the paper for each print job at an offset position so that it is easy
to identify the print job. This function can be used with the optional multifunction finisher and face down offset
tray.
• Load the original in the direction
as if you were reading it.
• Load the original with the top
of the page on the left side.
[Top side up] [Top side left]