Troubleshooting guide

3-2
ComColor Series Troubleshooting Guide 01
6 Close the staple cartridge cover.
7 Return the staple cartridge to its original
position.
8 Close the cover.
Replacing the UR2 or UR3 Staple Cartridge
The message may appear even if there are
staples remaining. Replace the staple
cartridge even if there are staples remaining.
The remaining staples cannot be used.
1 Open the cover.
2 Pull the staple unit toward you while
pushing the lever to the right and remove
the unit.
3 Hold the tabs on the left and right of the
staple cartridge, and lift the staple
cartridge up and to the left.