Troubleshooting guide

2-19
2
ComColor Series Troubleshooting Guide 01
●
Case of the UR2 or UR3 staple cartridge
1 Open the cover.
-
2 Pull the stapler unit toward you while
pushing the lever to the right and remove
the unit.
3 Hold the tabs on the left and right of the
staple cartridge, and lift the staple
cartridge up and to the left.
4 Remove the jammed staple.
CAUTION
When removing the staple, be careful not to injure
your fingers.
5 Hold the tabs on the left and right of the
staple cartridge, and install the staple
cartridge to its original position in the
stapler unit.
Push in the staple cartridge until it clicks.
6 Return the staple unit to its original
position.
7 Close the cover.