User`s guide

23
Administrator Settings
ComColor Series Administrator's Guide 01
Changing the Default in Copy/
Scanner Mode
Change the default when login is not necessary to
access each mode.
When login is necessary, users can set their own
default. The administrator can set the default if the
users have not saved their own default, or if they
have pressed [Initialize] after saving their own
default.
1 Login as a user with administrator
authority.
2 Press [Admin mode].
3 Press [Copy] or [Scanner].
4 Configure the copy or scan
settings.
5 Press [Check setting] on the
[Functions] screen, and then
check the settings.
6 Press [Save as default].
7 Press [OK].