User`s guide

19
Administrator Settings
ComColor Series Administrator's Guide 01
7 Press [OK].
When using a scanner unit, you can proceed to
configuration of e-mail addresses. Follow the
on-screen messages for configuration.
When using an IC card reader, the following
screen is displayed.
Hold the IC card over the IC card reader.
● To change or delete a user setting, perform the
following operation.
To delete a setting:
Select a user on the [User setting] screen and
press [Delete].
To change a setting:
Select a user on the [User setting] screen and
press [Change].
● When the IC card information has been
registered, the user icon on the left of the
user name is replaced with the card icon .
■ Setting with the RISO Console
Before configuring the user setting, configure
[Group setting] and [Index entry]. (See p. 8)
1 Click [User setting] on the
[Admin.] screen.
2 Click [Add user].