User`s guide

14
ComColor Series Administrator's Guide 01
Printable area
This machine cannot print on some areas around the edges of the paper (margins)
regardless of the original size. Use this to set the size of the margins. Normally, use
[Standard].
ComColor 9050/9050R/7050/7050R
• [Standard]
Margins of 3 mm (1/8") on the top, bottom, left, and right sides
• [Maximum]
Margins of 1 mm (1/16") on the top, bottom, left, and right sides
ComColor 7010R/7010/3050R/3050/3010R/3010
• [Standard]
Margins of 5mm (3/16") on the top, bottom, left, and right sides
• [Maximum]
Margins of 3mm (1/8") on the top, bottom, left, and right sides
When this has been set to [Maximum], the inside of the printer (transfer path) may
become soiled with ink depending on the original.
As a result, the edges or back of the paper may become soiled.
Standard, Maximum
Output tray in each mode
(when using the multifunction finisher or stacking tray)
Specify which tray has priority in each mode when [Output tray] is set to [Auto] on the
[Functions] screen in copy mode, or when [Output tray] (on the [Finishing] tab) of the
printer driver is set to [Auto]. (When the staple, punch, paper folding, or other finishing
function has been set, paper is output regardless of this priority.)
• When using the multifunction finisher:
Face down tray
, Top tray, Stacking
Tray
• When using the wide stacking tray:
Face down tray
, Wide stacking tray
• When using the RISO auto-control
stacking tray:
Face down tray
, RISO auto-control
stacking tray
Stack guide control (when using the RISO auto-control stacking
tray)
Specify which paper guides open when the paper guides open button is pressed with
paper in the RISO auto-control stacking tray.
End, Side
, Both
Job name display
Specify whether to disclose the job name displayed on the job list in printer mode. When
this has been set to [Closed] and login is necessary, those jobs other than for logged in
users are displayed as [∗∗∗∗∗]. When a user with administrator authority has been logged
in, all job names are disclosed regardless of this setting.
Closed, Disclosed
Setting/Description Set value/Details